|Earrings made from Art Clay Silver clay|
To make the shape, I rolled each piece of clay into a ball and then pierced the ball with a tapestry needle near the edge. Working the tapestry needle around the hole, I distorted the orifice and thinned out the silver clay along the top edge. I then squeezed and pulled the bead gently at the top edge to create the shape shown in the third image below. You have to work quickly as the clay begins to dry out while you handle it. Imperfections can be smoothed over with a wet paint brush or removed with sandpaper once the clay is dry.
|Stages of the bead as it was worked into shape.|
There are three methods for firing Art Clay Silver clay which include using a kiln, a gas hob or blowtorch (find out more about firing Art Clay Silver clay from the George Weil Fact File pages).
I used a blowtorch (see my previous post Art Clay Silver clay - tried and tested) and when fired, brushed off the white residue before compacting the surface with a burnisher to make it shiny.
To make the earrings, I connected each bead to a sterling silver fish hook earwire with a 6mm sterling silver bolt ring.
All the materials and tools used for making the earrings can be found on the George Weil website. Browse Silver Clay Working at www.georgeweil.com.